[Voiceglue] Some wave files end up not working after being cached?

[Andrew Zitnay]

Ok, I bumped dynlog_level up to 7, and made two calls...  The first was 
with a brand new test2.wav (simply copied over from test.wav to bypass 
any caching that happened during my test last week), and the log is 
available at:

http://www.zitnay.com/stuff/good.txt

The second was with the same test2.wav (now cached), and the log is 
available at:

http://www.zitnay.com/stuff/bad.txt

I don't see anything obvious (aside from the fact that the timestamps 
between call started and call ended are much closer in bad.txt, due to 
the fact that the audio didn't actually play), but hopefully you will :).

Drew

Doug Campbell wrote:
>> I'm using the VXML <audio src="..."> tag to play wave files during a 
>> voiceglue call.  It has typically worked fine, but I've recently come 
>> across some wave files that seemingly cause problems after being cached.
>>
>> I've made a sample of such a "faulty" wave file available at:
>>
>> http://www.zitnay.com/stuff/test.wav
>
> I've put this in a VXML script, run voiceglue on it, and it
> plays subsequent times fine.  Both subsequently in the same
> call, and in subsequent calls.
>
> If you have a log from a failure, it might reveal the problem.
>
> Doug Campbell
> _______________________________________________
> Voiceglue mailing list
> Voiceglue at voiceglue.org
> http://www.voiceglue.org/mailman/listinfo/voiceglue